+- NAT32 Software Router Support Forum (http://www.nat32.com/Forum)
+-- Forum: NAT32 Version 2 (http://www.nat32.com/Forum/forumdisplay.php?fid=1)
+--- Forum: Configuration (http://www.nat32.com/Forum/forumdisplay.php?fid=3)
+--- Thread: Interface Selection (/showthread.php?tid=5)
Interface Selection - nat32support - 08-01-2014
This dialog displays a list of all available adapters on your system. You choose an adapter you want NAT32 to use by selecting it and then clicking a Connection Type radio button.
To help you identify an adapter, select it and NAT32 will display the Adapter Description, the Adapter IP Address and its Windows Connection Name.
![[Image: select.gif]](http://v2.nat32.com/select.gif)
Here are a few guidelines for choosing Adapters:
- To give private machines Internet access, select a private network adapter and then click the Private radio button.
- To specify an Internet adapter, select it and then click the Internet radio button.
- Remember, NAT32 supports multiple Internet adapters and multiple private adapters, so proceed as above until you have selected all the adapters that you want NAT32 to use.
- Adapters that were not selected are ignored completely when NAT32 runs.